NOTE:
If the vehicle is jump started, leave the jumper connected until the warning message is no longer displayed.
If vehicle is driven while the warning is displayed, a warning sound will be heard and power steering assist will be limited.
“i-ELOOP changing” is displayed in the LCD frequently.
Vehicle is left for a long period
Capacitor (i-ELOOP) malfunction (if DTC is not detected)
Independently and frequently displayed DTC
P0A12:00, P0A94:00, P1794:00, U3000:49
DTC which is displayed frequently after a malfunction occurs caused in combination with a capacitor (i-ELOOP) voltage decrease due to the capacitor (i-ELOOP) not being used for long periods
P0A12:00, P0A94:00, P1628:11, P2502:00, P2503:00, U3000:49
Instrument cluster malfunction
| Step | Inspection | Results | Action |
| 1 | VERIFY DTCs
| Yes | Repair the malfunctioning part according to the applicable DTC troubleshooting. |
| No | Go to the next step. |
||
| 2 | ASK CUSTOMER
| Yes | Explain to the customer that the vehicle is normal and that if the vehicle is left undriven for long periods the capacitor (i-ELOOP) voltage is lowered and charging is required. |
| No | Go to the next step. |
||
| 3 | VERIFY IF CAPACITOR (i-ELOOP) HAS MALFUNCTION
| Yes | Inspect the instrument cluster and replace it if there is any malfunction. |
| No | Replace the capacitor (i-ELOOP). |