2014 - Mazda6 - Body and Accessories

FRONT COMBINATION LIGHT DISASSEMBLY/ASSEMBLY

1. Disassemble in the order shown in the figure.

Without discharge headlight system

1	Short cord (See Short Cord Removal Note.)
2	Parking/Front side marker/Front turn light bulb (See PARKING/FRONT SIDE MARKER/FRONT TURN LIGHT BULB REMOVAL/INSTALLATION [WITHOUT DISCHARGE HEADLIGHT SYSTEM].)
3	Headlight LO bulb (See HEADLIGHT BULB REMOVAL/INSTALLATION.)
4	Cover No.1 (See Cover Installation Note.)
5	Headlight HI bulb (See HEADLIGHT BULB REMOVAL/INSTALLATION.)
6	Cover No.2 (See Cover Installation Note.)
7	Front combination light

With discharge headlight system

1	Short cord (See Short Cord Removal Note.)
2	Front side marker/Front turn light bulb (See FRONT SIDE MARKER/FRONT TURN LIGHT BULB REMOVAL/INSTALLATION [WITH DISCHARGE HEADLIGHT SYSTEM].)
3	Discharge headlight control module (See DISCHARGE HEADLIGHT CONTROL MODULE REMOVAL/INSTALLATION.)
4	Headlight HI/LO bulb (See HEADLIGHT BULB REMOVAL/INSTALLATION.)
5	Front combination light

2. Assemble in the reverse order of disassembly.

Short Cord Removal Note

1. While pressing the clip tabs in the direction of the arrows (1) shown in the figure, press the clip in the direction of the arrow (2) shown in the figure to detach the clip tabs and front combination light.

2. Remove the short cord.

Cover Installation Note

1. Install the cover to the housing so that there is no clearance between the housing and the cover.

CAUTION:

• If there is a gap between the housing and the cover, water may penetrate from the gap causing a malfunction in the front combination light. Verify that there is no gap between the cover and the housing.