2014 - Mazda6 - Body and Accessories

FRONT CONSOLE REMOVAL/INSTALLATION

CAUTION:

• Affix protective tape to the position shown in the figure.

  

1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.5].)

2. Remove the following parts:

a. Upper panel (See UPPER PANEL REMOVAL/INSTALLATION.)

b. Shift lever knob (MTX) (See MANUAL TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION [C66M-R].)

c. Selector lever knob (ATX) (See AUTOMATIC TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION.)

d. Shift panel (See SHIFT PANEL REMOVAL/INSTALLATION.)

e. Rear console (See REAR CONSOLE REMOVAL/INSTALLATION.)

f. Front console box (See FRONT CONSOLE BOX REMOVAL/INSTALLATION.)

g. Side wall (See SIDE WALL REMOVAL/INSTALLATION.)

3. Remove fasteners A.

4. Pull the front console in the direction of the arrow in the order of (1), (2), (3), (4) and remove it while detaching clips A, clips B and hook C.

5. Remove the front console in the direction of the arrow (5) shown in the figure.

6. Install in the reverse order of removal.