2014 - Mazda6 - Body and Accessories

FRONT DOOR HINGE REMOVAL/INSTALLATION

1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.5].)

2. Remove the following parts:

a. Set plate (See SET PLATE REMOVAL/INSTALLATION.)

b. Front bumper (See FRONT BUMPER REMOVAL/INSTALLATION.)

c. Front combination light (See FRONT COMBINATION LIGHT REMOVAL/INSTALLATION.)

d. Side step molding (See SIDE STEP MOLDING REMOVAL/INSTALLATION.)

e. Front fender panel (See FRONT FENDER PANEL REMOVAL/INSTALLATION.)

f. Front door (See FRONT DOOR REMOVAL/INSTALLATION.)

3. Remove in the order shown in the figure.

1	Bolt
2	Front door hinge

4. Install in the reverse order of removal.

5. Adjust the headlight aiming. (See HEADLIGHT AIMING.)