< Previous   Next >

2014 - Mazda6 - Body and Accessories

DTC U3003:17 [FORWARD SENSING CAMERA (FSC)]



Description

Forward sensing camera (FSC) high power supply voltage input

Detection condition

  • Forward sensing camera (FSC) power supply circuit voltage of 16.8 V or more is detected for 5 s or more with the ignition switched ON (engine off or on).

Fail-safe function

  • Inhibits the lane departure warning system (LDWS).

  • Inhibits the high beam control (HBC) system.

Possible cause

  • DTCs are stored in the PCM.

  • Battery malfunction

  • Generator malfunction

  • Forward sensing camera (FSC) malfunction

System wiring diagram

Not applicable


Diagnostic Procedure

Step

Inspection

Action

1

VERIFY PCM DTCs

Yes

Repair or replace the malfunctioning part according to the applicable DTC troubleshooting.

(See DTC TABLE [SKYACTIV-G 2.5].)

No

Go to the next step.

2

INSPECT BATTERY

Yes

Go to the next step.

No

Replace the battery, then go to Step 4.

(See BATTERY REMOVAL/INSTALLATION [SKYACTIV-G 2.5].)

3

INSPECT GENERATOR

Yes

Go to the next step.

No

Replace the generator, then go to the next step.

(See GENERATOR REMOVAL/INSTALLATION [i-ELOOP].)

(See GENERATOR REMOVAL/INSTALLATION [SKYACTIV-G 2.5 (WITHOUT i-ELOOP)].)

4

VERIFY THAT REPAIRS HAVE BEEN COMPLETED

Yes

Repeat the inspection from Step 1.

Go to the next step.

No

Go to the next step.

5

VERIFY IF OTHER DTCs DISPLAYED
  • Are any other DTCs displayed?

Yes

Repair or replace the malfunctioning part according to the applicable DTC troubleshooting.

(See DTC TABLE [FORWARD SENSING CAMERA (FSC)].)

No

DTC troubleshooting completed.




< Previous   Next >
Back to Top
© 2012 Mazda North American Operations, U.S.A.