Description

Forward sensing camera (FSC) aiming not completed

Detection condition

• Forward sensing camera (FSC) aiming not completed is detected.

Fail-safe function

• Inhibits the lane departure warning system (LDWS).

• Inhibits the high beam control (HBC) system.

Possible cause

• Forward sensing camera (FSC) aiming not performed.

• Forward sensing camera (FSC) malfunction

System wiring diagram

Not applicable

Step

Inspection

Action

1

• Perform the forward sensing camera (FSC) aiming.

  (See FORWARD SENSING CAMERA (FSC) AIMING.)

• Clear the DTC for the forward sensing camera (FSC) using the M-MDS.

  (See CLEARING DTC [FORWARD SENSING CAMERA (FSC)].)

• Retrieve the forward sensing camera (FSC) DTCs using the M-MDS.

  (See DTC INSPECTION [FORWARD SENSING CAMERA (FSC)].)

• Is the same DTC displayed?

Yes

Perform the forward sensing camera (FSC) aiming again, then go to the next step.

(See FORWARD SENSING CAMERA (FSC) AIMING.)

No

Go to Step 3.

2

• Clear the DTC for the forward sensing camera (FSC) using the M-MDS.

  (See CLEARING DTC [FORWARD SENSING CAMERA (FSC)].)

• Retrieve the forward sensing camera (FSC) DTCs using the M-MDS.

  (See DTC INSPECTION [FORWARD SENSING CAMERA (FSC)].)

• Is the same DTC displayed?

Yes

Repeat the inspection from Step 1.

• If the malfunction recurs, replace the forward sensing camera (FSC).

  (See FORWARD SENSING CAMERA (FSC) REMOVAL/INSTALLATION.)

Go to the next step.

No

Go to the next step.

3

• Are any other DTCs displayed?

Yes

Repair or replace the malfunctioning part according to the applicable DTC troubleshooting.

(See DTC TABLE [FORWARD SENSING CAMERA (FSC)].)

No

DTC troubleshooting completed.