WARNING:
The side air bag sensor is attached to the lower part of the B-pillar. When working around the B-pillar, disconnect the negative battery cable or work carefully, avoiding excessive impact to the lower part of the B-pillar (with side air bag sensor No.1).
1. Switch the ignition off.
2. Disconnect the negative battery cable and wait for 1 min or more. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.5].)
3. Set the adjuster to the lowest position.
4. Remove the following parts:a. Front scuff plate (See FRONT SCUFF PLATE REMOVAL/INSTALLATION.)b. Rear scuff plate (See REAR SCUFF PLATE REMOVAL/INSTALLATION.)c. B-pillar lower trim (See B-PILLAR LOWER TRIM REMOVAL/INSTALLATION.)d. Front seat belt upper anchor installation bolt (See FRONT SEAT BELT REMOVAL/INSTALLATION.)e. B-pillar upper trim (See B-PILLAR UPPER TRIM REMOVAL/INSTALLATION.)
5. Remove bolt A.
6. Remove bolt B.
7. Remove the tab.
8. Remove the adjuster anchor.
9. Install in the reverse order of removal.