1. Remove the following parts:a. Front scuff plate (See FRONT SCUFF PLATE REMOVAL/INSTALLATION.)b. Rear scuff plate (See REAR SCUFF PLATE REMOVAL/INSTALLATION.)c. B-pillar lower trim (See B-PILLAR LOWER TRIM REMOVAL/INSTALLATION.)d. Adjuster anchor cover (See FRONT SEAT BELT REMOVAL/INSTALLATION.)e. Upper anchor installation bolts on the front seat belt (See FRONT SEAT BELT REMOVAL/INSTALLATION.)
2. Partially peel back the seaming welt.
3. Grasp the shaded area shown in the figure, and pull the B-pillar upper trim in the direction of the arrow (1) while detaching clips A, pin B, pin C.
4. Remove the B-pillar upper trim in the direction of the arrow (2) shown in the figure while detaching the guide D.CAUTION:
If clips A, pin B and pin C are removed forcefully, guide D may be damaged. Carefully remove clips A, pin B and pin C so as not to damage guide D.
5. Install in the reverse order of removal.