SECURITY AND LOCKS PERSONALIZATION

< Previous Next >

2014 - Mazda6 - Body and Accessories

SECURITY AND LOCKS PERSONALIZATION

Personalization features that switch the activation/deactivation of each function have been adopted.

The setting of the following system functions, and warning and guidance functions can be turned on/off optionally.

Refer to the Workshop Manual for the detailed setting procedure.

Advanced keyless entry system

Using Mazda Modular Diagnostic System (M-MDS)


Mazda Modular Diagnostic System (M-MDS) display	Function	Initial setting	Setting contents	Control unit
Advanced keyless function.^*1	The advanced keyless entry system and push button start system functions can be disabled.	Enabled.	Enabled. / Disabled.	Start stop unit
Walk Away Lock.	The out-of-area (reception area) type auto lock function can be set.	OFF	Not Adopted. / OFF / ON	Start stop unit
Auto Re-lock Time.	The operation start time of the auto re-lock function can be changed.	60 seconds	Not Adopted. / 30 seconds / 60 seconds / 90 seconds	Start stop unit
Lock Beep Volume.	The keyless beeper volume can be adjusted.	Medium	Not Adopted. / Off / Low / Medium / High	Start stop unit

*1: Because the push button start system function has been disabled, to start the engine press the upper part of the remote transmitter against the center of the push button start.

Using audio unit (with color LCD)


Audio unit display	Function	Initial setting	Setting contents	Control unit
Walk Away Lock.	The out-of-area (reception area) type auto lock function can be set.	OFF	OFF / ON	Start stop unit
Auto Re-lock Time.	The operation start time of the auto re-lock function can be changed.	60 seconds	30 seconds / 60 seconds / 90 seconds	Start stop unit
Lock Beep Volume.	The keyless beeper volume can be adjusted.	Medium	Off / Low / Medium / High	Start stop unit

Keyless entry system

Using Mazda Modular Diagnostic System (M-MDS)


Mazda Modular Diagnostic System (M-MDS) display	Function	Initial setting	Setting contents	Control unit
Advanced keyless function.^*1	The keyless entry system and push button start system functions can be disabled.	Enabled.	Enabled. / Disabled.	Start stop unit
Auto Re-lock Time.	The operation start time of the auto re-lock function can be changed.	60 seconds	Not Adopted. / 30 seconds / 60 seconds / 90 seconds	Start stop unit

*1: Because the push button start system function has been disabled, to start the engine press the upper part of the remote transmitter against the center of the push button start.

Using audio unit (with color LCD)


Audio unit display	Function	Initial setting	Setting contents	Control unit
Auto Re-lock Time.	The operation start time of the auto re-lock function can be changed.	60 seconds	30 seconds / 60 seconds / 90 seconds	Start stop unit

Power door lock system

Using Mazda Modular Diagnostic System (M-MDS)


Mazda Modular Diagnostic System (M-MDS) display	Function	Initial setting	Setting contents	Control unit
Unlock Mode (Without Touch Sensor)	2-step unlocking system can be set.	Once:Driver's, Twice: All Doors.	Not Adopted. / Touch Once: All Doors. / Once:Driver's, Twice: All Doors.	Start stop unit
Auto Door Lock Mode	Auto door lock function can be changed.	Lock: Driving, Unlock: IGN Off.	Not Adopted. / OFF / Lock When Driving. / Lock: Driving, Unlock: IGN Off. / Lock When Shifting Out Of P. / Lock: Shift From P, Unlock: In P.	Rear body control module (RBCM)

Using audio unit (with color LCD)


Audio unit display	Function	Initial setting	Setting contents	Control unit
Unlock Mode (Without Touch Sensor)	2-step unlocking system can be set.	Once Driver's, Twice: All Doors.	Touch Once: ALL Doors. / Once Driver's, Twice: All Doors.	Start stop unit
Auto Door Lock Mode	Auto door lock function can be changed.	Lock: Driving, Unlock: IGN Off	OFF / Lock When Driving. / Lock: Driving, Unlock: IGN Off. / Lock When Shifting Out Of P. / Lock: Shift From P, Unlock: In P.	Rear body control module (RBCM)

< Previous Next >