INSTRUMENT CLUSTER PERSONALIZATION FEATURES SETTING PROCEDURE

< Previous Next >

2014 - Mazda6 - Body and Accessories

INSTRUMENT CLUSTER PERSONALIZATION FEATURES SETTING PROCEDURE

Smart City Brake Support (SCBS) (type A instrument cluster only)

1. Switch the ignition ON (engine off or on).

2. Select "Setting" by operating the up/down switch and INFO button for the steering switch.

3. Select the following items and change the setting.


LCD	Function	Initial setting	Setting contents	Control unit
SCBS	The operation of smart city brake support (SCBS) can be turned off.	ON	ON / OFF	Laser sensor

Blind Spot Monitoring (BSM) System

Using M-MDS

1. Connect the M-MDS to the DLC-2.

2. After vehicle identification, select the following from the M-MDS initialization screen.
a. “Module programming”

b. “Programmable Parameters”

3. Select menu in the “IC”.

4. Select an item name, and than select option.


Mazda Modular Diagnostic System (M-MDS) display	Function	Initial setting	Setting contents	Control unit
BSM Volume.	The volume of the blind spot monitoring (BSM) warning alarm can be changed.	High	Not Adopted. / OFF / Low / High	Instrument cluster

Using type A instrument cluster

1. Switch the ignition ON (engine off or on).

2. Select "Setting" by operating the up/down switch and INFO button for the steering switch.

3. Select "BSM" by operating the up/down switch and INFO button for the steering switch.

4. Select the following items and change the setting.


LCD	Function	Initial setting	Setting contents	Control unit
Volume	The volume of the blind spot monitoring (BSM) warning alarm can be changed.	High	High / Low / OFF	Instrument cluster

Lane Departure Warning System (LDWS)

Using M-MDS

1. Connect the M-MDS to the DLC-2.

2. After vehicle identification, select the following from the M-MDS initialization screen.
a. “Module programming”

b. “Programmable Parameters”

3. Select menu in the “IC”.

4. Select an item name, and than select option.


Mazda Modular Diagnostic System (M-MDS) display	Function	Initial setting	Setting contents	Control unit
LDWS Sound.	The type of the LDWS warning alarm can be changed.	Rumble or Beep^*1	Beep / Rumble	Instrument cluster

Using instrument cluster

1. Switch the ignition ON (engine off or on).

2. Select "Setting" by operating the up/down switch and INFO button for the steering switch.

3. Select "LDWS" by operating the up/down switch and INFO button for the steering switch.

4. Select the following items and change the setting.


LCD	Function	Initial setting	Setting contents	Control unit
Sound Type	The type of LDWS warning alarm can be changed.	Rumble or Beep^*1	Rumble / Beep	Instrument cluster
Volume	The volume of the LDWS warning alarm (Rumble) can be changed.	Low or High^*1	High / Medium / Low	Instrument cluster
Volume	The volume of the LDWS warning alarm (Beep) can be changed.	Low or High^*1	High / Low	Instrument cluster

^*1: The initial setting differs depending on the market.

Forward Obstruction Warning (FOW) System (type A instrument cluster only)

1. Switch the ignition ON (engine off or on).

2. Select "Setting" by operating the up/down switch and INFO button for the steering switch.

3. Select "FOW" by operating the up/down switch and INFO button for the steering switch.

4. Select the following items and change the setting.


LCD	Function	Initial setting	Setting contents	Control unit
ON/OFF	The operation of forward obstruction warning (FOW) system can be turned off.	ON	ON / OFF	Vehicle control module (V/C-Module)
Distance	The operation distance for the warning function can be changed.	Near	Near / Far	Vehicle control module (V/C-Module)
Volume	The volume of the FOW warning alarm can be changed.	High	High / Low / OFF	Instrument cluster

Turn and Hazard Indicator Alarm

Using M-MDS

1. Connect the M-MDS to the DLC-2.

2. After vehicle identification, select the following from the M-MDS initialization screen.
a. “Module programming”

b. “Programmable Parameters”

3. Select menu in the “IC”.

4. Select an item name, and than select option.


Mazda Modular Diagnostic System (M-MDS) display	Function	Initial setting	Setting contents	Control unit
Turn Signal Volume.	The volume of the turn and hazard indicator alarm can be changed.	High	Not Adopted. / Low / High	Instrument cluster

Using type A instrument cluster

1. Switch the ignition ON (engine off or on).

2. Select "Setting" by operating the up/down switch and INFO button for the steering switch.

3. Select "Volumes" by operating the up/down switch and INFO button for the steering switch.

4. Select the following items and change the setting.


LCD	Function	Initial setting	Setting contents	Control unit
Turn Signal	The volume of the turn and hazard indicator alarm can be changed.	High	High / Low	Instrument cluster

Lights-on Reminder Warning Alarm

Using M-MDS

1. Connect the M-MDS to the DLC-2.

2. After vehicle identification, select the following from the M-MDS initialization screen.
a. “Module programming”

b. “Programmable Parameters”

3. Select menu in the “IC”.

4. Select an item name, and than select option.


Mazda Modular Diagnostic System (M-MDS) display	Function	Initial setting	Setting contents	Control unit
Lights-on Reminder Volume.	The volume for the lights-on reminder warning alarm can be changed.	High	Not Adopted. / OFF / Low / High	Instrument cluster

Using type A instrument cluster

1. Switch the ignition ON (engine off or on).

2. Select "Setting" by operating the up/down switch and INFO button for the steering switch.

3. Select "Volumes" by operating the up/down switch and INFO button for the steering switch.

4. Select the following items and change the setting.


LCD	Function	Initial setting	Setting contents	Control unit
Light-on	The volume for the lights-on reminder warning alarm can be changed.	High	High / Low / OFF	Instrument cluster

Language (type A instrument cluster only)

1. Switch the ignition ON (engine off or on).

2. Select "Setting" by operating the up/down switch and INFO button for the steering switch.

3. Select the following items and change the setting.


LCD	Function	Initial setting	Setting contents	Control unit
Language	The display language can be changed.	English		Instrument cluster

Distance (type A instrument cluster only)

1. Switch the ignition ON (engine off or on).

2. Select "Setting" by operating the up/down switch and INFO button for the steering switch.

3. Select "Units" by operating the up/down switch and INFO button for the steering switch.

4. Select the following items and change the setting.


LCD	Function	Initial setting	Setting contents	Control unit
Distance	The distance unit can be changed.	km or miles^*1	km / mile	Instrument cluster

^*1: The initial setting differs depending on the market.

Temperature

NOTE:

When the ambient temperature display is switched, the set A/C cabin temperature display is also changed.

Using type A instrument cluster

1. Switch the ignition ON (engine off or on).

2. Select "Setting" by operating the up/down switch and INFO button for the steering switch.

3. Select "Units" by operating the up/down switch and INFO button for the steering switch.

4. Select the following items and change the setting.


LCD	Function	Initial setting	Setting contents	Control unit
Temperature	The temperature unit can be changed.	°C or °F^*1	°C / °F	Instrument cluster

Using type B instrument cluster

^*1: The initial setting differs depending on the market.

Instrument Cluster Operation Sound (Type A instrument cluster only)

1. Switch the ignition ON (engine off or on).

2. Select "Setting" by operating the up/down switch and INFO button for the steering switch.

3. Select "Volumes" by operating the up/down switch and INFO button for the steering switch.

4. Select the following items and change the setting.

LCD

Function

Initial setting

Setting contents

Control unit

Button Beep

The sound volume for the following operations can be changed.

Trip computer data is reset

INFO button is pressed for 1.5 s or more while average fuel economy/average vehicle speed is displayed.

Scrolling value is operated

Up/down switch on period setting screen of maintenance monitor is pressed for 1.5 s or more.

High

High / Low / OFF

Instrument cluster

< Previous Next >