If the resistance cannot be verified as indicated in the table, replace the cluster switch.
NOTE:
The LDWS switch is integrated with the cluster switch.
For the LDWS switch removal/installation, refer to CLUSTER SWITCH REMOVAL/INSTALLATION. (See CLUSTER SWITCH REMOVAL/INSTALLATION.)
1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.5].)
2. Remove the LDWS switch. (See LDWS SWITCH REMOVAL/INSTALLATION.)
3. Verify that the resistance between LDWS switches B and C is as indicated in the table.
If the resistance cannot be verified as indicated in the table, replace the cluster switch.
4. Apply battery positive voltage to LDWS switch terminal J, and connect terminal I to ground.
5. Verify that the LED illuminates.
If there is any malfunction, replace the cluster switch.