If the resistance cannot be verified as indicated in the table, replace the cluster switch.
NOTE:
The BSM OFF switch is integrated with the cluster switch.
For the BSM OFF switch removal/installation, refer to CLUSTER SWITCH REMOVAL/INSTALLATION. (See CLUSTER SWITCH REMOVAL/INSTALLATION.)
1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.5].)
2. Remove the BSM OFF switch. (See BLIND SPOT MONITORING (BSM) OFF SWITCH REMOVAL/INSTALLATION.)
3. Verify that the resistance between BSM OFF switches B and C is as indicated in the table.
If the resistance cannot be verified as indicated in the table, replace the cluster switch.
4. Apply battery positive voltage to BSM OFF switch terminal J, and connect terminal I to ground.
5. Verify that the LED illuminates.
If there is any malfunction, replace the cluster switch.