NOTE:
If the procedure is performed while holding the tweeter cone, it could deform the cone causing a malfunction. Therefore, perform the procedure while holding any part other than the cone.
1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.5].)
2. Remove the side speaker grille. (See SPEAKER GRILLE REMOVAL/INSTALLATION.)
3. Remove the screws.
4. Remove the tweeter.
5. Disconnect the connector.
6. Install in the reverse order of removal.
1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.5].)
2. Remove the side speaker grille. (See SPEAKER GRILLE REMOVAL/INSTALLATION.)
3. While pressing the side speaker grille in the direction of arrow (1) shown in the figure, pull the tweeter in the direction of arrow (2) to detach the tweeter tabs from the side speaker grille.
4. Remove the tweeter.
5. Install in the reverse order of removal.