1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.5].)
2. Partially peel back the mudguard and front under cover No.1. (See MUDGUARD REMOVAL/INSTALLATION.) (See FRONT UNDER COVER No.1 REMOVAL/INSTALLATION.)
3. Disconnect the connector.
4. Remove screws A.
5. Pull out the pins from the bracket to remove the front fog light and bracket.
6. Remove the bolt and screw B.
7. Remove the front fog light.
8. Install in the reverse order of removal.
9. Adjust the front fog light aiming. (See FRONT FOG LIGHT AIMING.)