There are two methods for personalizing the turn light system: One using the M-MDS and the other using the audio unit (with color LCD). Refer to the following and perform the setting.
Using audio unit (with color LCD)
There are two methods for personalizing the auto light system: One using the M-MDS and the other using the audio unit (with color LCD). Refer to the following and perform the setting.
Using audio unit (with color LCD)
There are two methods for personalizing the auto light-off system: One using the M-MDS and the other using the audio unit (with color LCD). Refer to the following and perform the setting.
Using audio unit (with color LCD)
There are two methods for personalizing the high beam control (HBC) system: One using the M-MDS and the other using the audio unit (with color LCD). Refer to the following and perform the setting.
Using audio unit (with color LCD)
There are two methods for personalizing the room light control system: One using the M-MDS and the other using the audio unit (with color LCD). Refer to the following and perform the setting.
Using audio unit (with color LCD)
| Function | Initial setting | Setting contents | Control module |
| The DRL system function can be set. | On (DRL illumination) | Off (DRL non-illumination)/On (DRL illumination) | Front body control module (FBCM) |
Perform the following procedure to change the DRL illumination/non-illumination setting.
NOTE:
Because each procedure needs to be completed within a predetermined period of time, refer to the following procedure before performing the set up work, and then verify the content of the work and the time limit.
