1. Disassemble in the order indicated in the table.
| 1 | Screw A |
| 2 | Drip rail |
| 3 | Rear stopper |
| 4 | Sunshade (See Sunshade Disassembly Note.) |
| 5 | Screw B |
| 6 | Sunroof motor |
| 7 | Front guide (See Front Guide Disassembly Note.) |
| 8 | Decoration link |
| 9 | Screen |
| 10 | Screw C |
| 11 | Set plate |
| 12 | Screw D |
| 13 | Front stopper |
| 14 | Bolt E |
| 15 | Bracket |
| 16 | Sunroof frame |
2. Assemble in the reverse order of disassembly.
Pull the sunshade in the direction of the arrow in the order of (1), (2) and remove it.
CAUTION:
The sunshade may contact the sunroof frame and the handle area may be damaged. Remove the sunshade by sliding it in the direction of arrow (2) shown in the figure while lifting it in the direction of arrow (1).
Perform mark the position shown in the figure for correct positioning.
CAUTION:
If the front guide is assembled to a wrong position, the glass panel may stop at the wrong position and may be damaged. Before removing the front guide, mark the position shown in the figure for correct positioning.
To prevent the wire shown in the figure from coming off the rail, install while aligning the wire in the rail.
