Standard clearance
a: 2.5―4.5 mm {0.10―0.17 in}
b: -0.5―1.5 mm {-0.01―0.05 in}
c: 2.5―4.5 mm {0.10―0.17 in}
d: -0.5―1.5 mm {-0.01―0.05 in}
e: 2.5―4.5 mm {0.10―0.17 in}
f: -1.0―1.0 mm {-0.039―0.039 in}
1. Measure the gap and height difference between the door and the body.
2. Loosen the door hinge installation bolts and adjust the door.
Standard clearance
a: 2.5―4.5 mm {0.10―0.17 in}
b: -0.5―1.5 mm {-0.01―0.05 in}
c: 2.5―4.5 mm {0.10―0.17 in}
d: -0.5―1.5 mm {-0.01―0.05 in}
e: 2.5―4.5 mm {0.10―0.17 in}
f: -1.0―1.0 mm {-0.039―0.039 in}
3. Tighten the door hinge installation bolts. (See FRONT DOOR REMOVAL/INSTALLATION.) (See REAR DOOR REMOVAL/INSTALLATION.)
4. If the door does not open/close smoothly, adjust it by loosening the door lock striker installation screw. (See DOOR LOCK STRIKER REMOVAL/INSTALLATION.)
5. Spray or pour water on the door and surrounding area using a hose or high pressure water pressure car wash and verify that there is no water leakage.