2014 - Mazda6 - Body and Accessories

REAR DOOR HINGE REMOVAL/INSTALLATION

1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.5].)

2. Remove the following parts:

a. Rear door (See REAR DOOR REMOVAL/INSTALLATION.)

b. Front scuff plate (See FRONT SCUFF PLATE REMOVAL/INSTALLATION.)

c. Rear scuff plate (See REAR SCUFF PLATE REMOVAL/INSTALLATION.)

d. B-pillar lower trim (See B-PILLAR LOWER TRIM REMOVAL/INSTALLATION.)

3. Remove in the order shown in the figure.

1	Bolt A
2	Nut B
3	Rear door hinge

4. Install in the reverse order of removal.