1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.5].)
2. Remove the set plate. (See SET PLATE REMOVAL/INSTALLATION.)
3. Remove the front bumper. (See FRONT BUMPER REMOVAL/INSTALLATION.)
4. Remove fasteners A.
5. Remove the intake air guide in the direction of the arrow shown in the figure while detaching tabs B.
6. Install in the reverse order of removal.
7. Adjust the front fog light aiming. (with front fog lights) (See FRONT FOG LIGHT AIMING.)