1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.5].)
2. Remove the set plate. (See SET PLATE REMOVAL/INSTALLATION.)
3. Remove the front bumper. (See FRONT BUMPER REMOVAL/INSTALLATION.)
4. Remove bolts A.
5. Remove the seal plate in the direction of the arrow shown in the figure while detaching tab B and pin C.
6. Install in the reverse order of removal.
7. Adjust the front fog light aiming. (with front fog lights) (See FRONT FOG LIGHT AIMING.)