1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.5].)
2. Remove the set plate. (See SET PLATE REMOVAL/INSTALLATION.)
3. Remove the front bumper. (See FRONT BUMPER REMOVAL/INSTALLATION.)
4. Remove bolts A.
5. Remove tab B shown in the figure.
6. Pull the front bumper slider in the direction of the arrow (1) while detaching pin C.
7. Install in the reverse order of removal.
8. Adjust the front fog light aiming. (with front fog lights) (See FRONT FOG LIGHT AIMING.)
1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.5].)
2. Remove the rear combination light. (See REAR COMBINATION LIGHT REMOVAL/INSTALLATION.)
3. Remove the rear splash shield. (See SPLASH SHIELD REMOVAL/INSTALLATION.)
4. Remove the rear bumper. (See REAR BUMPER REMOVAL/INSTALLATION.)
5. Remove screws A.
6. Remove nut B.
7. Pull the rear bumper slider in the direction of the arrow (1) while detaching hook C.
8. Install in the reverse order of removal.