< Previous   Next >

2014 - Mazda6 - Body and Accessories

DTC B134D:02 [FRONT BODY CONTROL MODULE (FBCM)]



Description

Headlight control signal error

Detection condition

  • Front body control module (FBCM) receives the error signal from the start stop unit for 5 s or more with the ignition switched ON (engine off or on).

Fail-safe function

  • If DTC B134D:02 is detected when the ignition is switched ON (engine off or on), the headlight LO and the TNS are illuminated.

  • If DTC B134D:02 is cleared, the headlight LO and the TNS are turned off, and the operation returns to normal.

Possible cause

  • DTCs are stored in the start stop unit.

  • Front body control module (FBCM) malfunction

System wiring diagram

Not applicable


Diagnostic Procedure

Step

Inspection

Action

1

VERIFY FRONT BODY CONTROL MODULE (FBCM) DTCs AGAIN

Yes

Go to the next step.

No

Go to Step 4.

2

VERIFY START STOP UNIT DTCs

Yes

Repair or replace the malfunctioning part according to the applicable DTC troubleshooting.

(See DTC TABLE [START STOP UNIT].)

No

Go to the next step.

3

VERIFY THAT REPAIRS HAVE BEEN COMPLETED

Yes

Repeat the inspection from Step 1.

Go to the next step.

No

Go to the next step.

4

VERIFY IF OTHER DTCs DISPLAYED
  • Are any other DTCs displayed?

Yes

Repair or replace the malfunctioning part according to the applicable DTC troubleshooting.

(See DTC TABLE [FRONT BODY CONTROL MODULE (FBCM)].)

No

DTC troubleshooting completed.




< Previous   Next >
Back to Top
© 2012 Mazda North American Operations, U.S.A.