< Previous   Next >

2014 - Mazda6 - Body and Accessories

DTC U3003:17 [AUDIO AMPLIFIER]



Description

Audio amplifier high power supply voltage input

Detection condition

Larger value than audio amplifier power supply circuit voltage of 16 V is detected with ignition switched ON (engine off or on)

Fail-safe function

Not applicable

Possible cause

  • Battery malfunction

  • Generator malfunction

  • Audio amplifier malfunction

System wiring diagram

Not applicable


Diagnostic Procedure

Step

Inspection

Action

1

VERIFY PCM DTCs

Yes

Repair the malfunctioning part according to the applicable DTC troubleshooting.

(See DTC TABLE [SKYACTIV-G 2.5].)

No

Go to the next step.

2

INSPECT BATTERY

Yes

Recharge or replace the battery, then go to Step 4.

(See BATTERY RECHARGING [SKYACTIV-G 2.5].)

(See BATTERY REMOVAL/INSTALLATION [SKYACTIV-G 2.5].)

No

Go to the next step.

3

INSPECT GENERATOR

Yes

Replace the generator, then go to the next step.

(See GENERATOR REMOVAL/INSTALLATION [i-ELOOP].)

(See GENERATOR REMOVAL/INSTALLATION [SKYACTIV-G 2.5 (WITHOUT i-ELOOP)].)

No

Go to the next step.

4

Yes

Return to Step 1 and inspect for other possible causes.

If the malfunction recurs, replace the audio amplifier, then go to the next step.

(See AUDIO AMPLIFIER REMOVAL/INSTALLATION.)

No

Go to the next step.

5

    VERIFY IF OTHER DTCs DISPLAYED
  • Verify if other DTCs are displayed.

  • Are any other DTCs displayed?

Yes

Repair the malfunctioning part according to the applicable DTC troubleshooting.

(See DTC TABLE [AUDIO AMPLIFIER].)

No

DTC troubleshooting completed.




< Previous   Next >
Back to Top
© 2012 Mazda North American Operations, U.S.A.