Description

Communication error with PCM (data received failure)

Detection condition

• Start stop unit detects a communication error (data received failure) with PCM.

Fail-safe function

Not applicable

Possible cause

• The immobilizer system-related part programming has not been performed when replacing the PCM or start stop unit.

• Start stop unit malfunction

• PCM malfunction

System wiring diagram

Not applicable

Step

Inspection

Action

1

• Perform the start stop unit replacement and programming due to simultaneous replacement of start stop unit/PCM.

  (See IMMOBILIZER SYSTEM-RELATED PARTS PROGRAMMING.)

• Clear the DTC for the immobilizer system using the M-MDS.

  (See CLEARING DTC [IMMOBILIZER SYSTEM].)

• Retrieve the immobilizer system DTCs using the M-MDS.

  (See DTC INSPECTION [IMMOBILIZER SYSTEM].)

• Is the security indicator light: 22, DTC B10DA:51/P1260:00 displayed?

Yes

Go to the next step.

No

Go to Step 4.

2

• Clear the DTC for the immobilizer system using the M-MDS.

  (See CLEARING DTC [IMMOBILIZER SYSTEM].)

• Retrieve the immobilizer system DTCs using the M-MDS.

  (See DTC INSPECTION [IMMOBILIZER SYSTEM].)

• Is the security indicator light: 22, DTC B10DA:51/P1260:00 displayed?

Yes

Replace the start stop unit, then go to the next step.

(See START STOP UNIT REMOVAL/INSTALLATION.)

No

Go to Step 4.

3

• Clear the DTC for the immobilizer system using the M-MDS.

  (See CLEARING DTC [IMMOBILIZER SYSTEM].)

• Retrieve the immobilizer system DTCs using the M-MDS.

  (See DTC INSPECTION [IMMOBILIZER SYSTEM].)

• Is the security indicator light: 22, DTC B10DA:51/P1260:00 displayed?

Yes

Replace the PCM, then go to the next step.

(See PCM REMOVAL/INSTALLATION [SKYACTIV-G 2.5].)

No

Go to the next step.

4

• Are any other DTCs displayed?

Yes

Repair or replace the malfunctioning part according to the applicable DTC troubleshooting.

(See DTC TABLE [IMMOBILIZER SYSTEM].)

No

DTC troubleshooting completed.