CAUTION:
If the retractor is disassembled, it will not operate correctly due to looseness and excessive play of the internal parts, therefore, do not disassemble the retractor.
1. Remove the following parts:a. Rear seat cushion (See REAR SEAT CUSHION REMOVAL/INSTALLATION.)b. Rear scuff plate (See REAR SCUFF PLATE REMOVAL/INSTALLATION.)c. Rear side seat back (See REAR SIDE SEAT BACK REMOVAL/INSTALLATION.)d. Tire house trim (See TIRE HOUSE TRIM REMOVAL/INSTALLATION.)e. C-pillar trim (See C-PILLAR TRIM REMOVAL/INSTALLATION.)f. Rear package trim (See REAR PACKAGE TRIM REMOVAL/INSTALLATION.)
2. Remove the bolts.
3. Remove the rear center seat belt with the rear buckle (LH).
4. Install in the reverse order of removal. (See Rear Center Seat Belt Installation Note.)
1. After installing the rear center seat belt, place it as shown in the figure.
