1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.5].)
2. Fold the rear seat back.
3. Remove the following parts:a. Rear scuff plate (See REAR SCUFF PLATE REMOVAL/INSTALLATION.)b. Rear seat cushion (See REAR SEAT CUSHION REMOVAL/INSTALLATION.)c. Rear side seat back (See REAR SIDE SEAT BACK REMOVAL/INSTALLATION.)d. Tire house trim (See TIRE HOUSE TRIM REMOVAL/INSTALLATION.)e. C-pillar trim (See C-PILLAR TRIM REMOVAL/INSTALLATION.)f. High-mount brake light (See HIGH-MOUNT BRAKE LIGHT REMOVAL/INSTALLATION.)
4. Remove fasteners A.
5. Pull up the rear package trim in the direction of the arrow (1) shown in the figure while remove fastener B, pull the rear package trim in the direction of the arrow (2), and remove it while pulling out the guides.
6. Install in the reverse order of removal.