REAR WHEEL ALIGNMENT

< Previous Next >

2014 - Mazda6 - Suspension

REAR WHEEL ALIGNMENT

Rear wheel alignment (Unloaded)*1


Item			Fuel gauge indication
Item			Empty	1/4	1/2	3/4	Full
Total toe-in	Tire [Tolerance ±4 {0.2}]	(mm {in})	2 {0.08}
	Rim inner [Tolerance ±3 {0.1}]	(mm {in})	1.0 {0.04}
	(degree)		0°10′±0°20′
Camber angle^*2(Reference value) [Tolerance ±1°]			-0°53′	-0°56′	-0°58′	-1°00′	-1°03′
Thrust angle (Reference value) [Tolerance ±0°48′]			0°00′

*¹: Engine coolant and engine oil are at specified level. Spare tire, jack and tools are in designated position.
*²: Difference between left and right must not exceed 1°30′.

Total Toe-in Adjustment

1. Loosen the installation nut of the adjusting cam bolt.

2. Rotate the adjusting cam bolt in either direction to adjust the toe-in.

Left wheel

Right wheel

Toe-out direction

Clockwise

Counterclockwise

Toe-in direction

Counterclockwise

Clockwise


	Left wheel	Right wheel
Toe-out direction	Clockwise	Counterclockwise
Toe-in direction	Counterclockwise	Clockwise

3. Tighten the nut.

Tightening torque

84—101 N·m {8.6—10 kgf·m, 62—74 ft·lbf}

< Previous Next >