1. When installing the wheels and tires, tighten the wheel nuts in a criss-cross pattern to the following tightening torque.
Tightening torque
108—147 N·m {12—14 kgf·m, 80—108 ft·lbf}
1. For the joint sections with rubber bushings, raise the vehicle using a lift, and then temporarily tighten the installation bolts and nuts. Lower the vehicle to the ground and tighten them to the specified tightening torque.
1. Disconnect the negative battery cable before performing any work that requires handling of connectors. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.5].)
1. Initialize the auto leveling sensor, when performing the following services. (See HEADLIGHT AUTO LEVELING SYSTEM INITIALIZATION.)
Removing the auto leveling sensor
Disconnecting the auto leveling sensor link
Removing the suspension parts related the vehicle height