Step

Inspection

Results

Action

1

TIRE PRESSURE INSPECTION

• Inspect tire pressures while the tires are cold.

  (See WHEEL AND TIRE SPECIFICATION.)

• Are the tire pressures at the specification?

Yes

Go to the next step.

No

Adjust the tire pressures to the specification while the tires are cold.

2

TIRE PRESSURE MONITORING SYSTEM INITIALIZATION

• Perform tire pressure monitoring system initialization.

• Connect the M-MDS (IDS) to DLC-2.

• After the vehicle is identified, select the following items from the initial screen of the IDS.

• Select"Chassis"

• Select"ABS/DSC"

• Select"TPMS Reset"

• Was the tire pressure monitoring system initialization performed?

Yes

Go to the next step.

No

Perform the tire pressure monitoring system initialization.

3

TIRE PRESSURE MONITORNING SYSTEM WARNING LIGHT VERIFICATION

• Drive the vehicle for several minutes after the tire pressure monitoring system warning light turns off.

• Does the tire pressure monitoring system warning light illuminate?

Yes

Inspect the tires and wheels for air leakage.

No

The tire pressure monitoring system is normal.