2014 - Mazda6 - Engine

NEUTRAL SWITCH INSPECTION [SKYACTIV-G 2.5]

Continuity Inspection

1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.5].)

2. Remove the neutral switch. (See NEUTRAL SWITCH REMOVAL/INSTALLATION [C66M-R].)

3. Inspect for continuity between neutral switch terminal A and B.

• If not as specified, replace the neutral switch. (See NEUTRAL SWITCH REMOVAL/INSTALLATION [C66M-R].)

Specification

Measured condition	Continuity
Rod pushed	Continuity detected
Rod not pushed	No continuity