If there is any malfunction, replace the washer motor. (See WASHER MOTOR REMOVAL/INSTALLATION.)
1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.5].)
2. Set the mudguard aside. (See MUDGUARD REMOVAL/INSTALLATION.)
3. Remove the front bumper. (See FRONT BUMPER REMOVAL/INSTALLATION.)
4. Disconnect the washer motor connector from the washer motor.
5. Disconnect the windshield washer hose from the washer motor.
WARNING:
Water sprayed on the battery and ground could cause electrocution. When performing the washer motor inspection, prepare a container to collect washer fluid and be careful not to spray washer fluid.
6. After connecting washer motor terminal A to the positive battery terminal, and terminal B to ground, verify that washer fluid sprays from the front side of the washer motor.
If there is any malfunction, replace the washer motor. (See WASHER MOTOR REMOVAL/INSTALLATION.)