1. Remove the side turn light. (See SIDE TURN LIGHT REMOVAL/INSTALLATION.)
2. Apply battery voltage to side turn light terminal A, and connect terminal B to ground.
3. Verify that the LED illuminates.
If the LED illuminates, go to the next step.
If the LED does not illuminate, replace the side turn light. (See SIDE TURN LIGHT REMOVAL/INSTALLATION.)
4. Remove the following parts:a. Inner garnish (See INNER GARNISH REMOVAL/INSTALLATION.)b. Front door trim (See FRONT DOOR TRIM REMOVAL/INSTALLATION.)c. Power outer mirror connector (See POWER OUTER MIRROR REMOVAL/INSTALLATION.)
5. Verify that the continuity between side turn light terminal and power outer mirror terminal is as indicated in the table.
If not as indicated in the table, replace the power outer mirror. (See POWER OUTER MIRROR REMOVAL/INSTALLATION.)