Standard clearance
a: –2.4—0.2 mm {–0.094—0.007 in}
b: –2.3—0.3 mm {–0.09—0.01 in}
1. Fully close the glass panel.
2. Measure the gap and height between the glass panel and body.
3. Loosen the installation screws and adjust the glass panel.
Standard clearance
a: –2.4—0.2 mm {–0.094—0.007 in}
b: –2.3—0.3 mm {–0.09—0.01 in}
4. Tighten the installation screws. (See GLASS PANEL REMOVAL/INSTALLATION.)
5. Insert a plastic card between the weatherstrip and the body of the vehicle. Verify that the sunroof is shut tightly (there is resistance when the plastic card is moved).
If the sunroof is not shut tightly, readjust by performing Steps 3 and 4.