2014 - Mazda6 - Body and Accessories

REQUEST SWITCH INSPECTION

Driver's Door/Passenger's Door

1. Perform the front door glass preparation. (See FRONT DOOR GLASS REMOVAL/INSTALLATION.)

2. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.5].)

3. Remove the following parts:

a. Inner garnish (See INNER GARNISH REMOVAL/INSTALLATION.)

b. Front door trim (See FRONT DOOR TRIM REMOVAL/INSTALLATION.)

c. Front door glass (See FRONT DOOR GLASS REMOVAL/INSTALLATION.)

d. Front door module panel (See FRONT DOOR MODULE PANEL REMOVAL/INSTALLATION.)

e. Front door key cylinder (driver's side) (See FRONT DOOR KEY CYLINDER REMOVAL/INSTALLATION.)

f. Front outer handle (See FRONT OUTER HANDLE REMOVAL/INSTALLATION.)

4. Verify that the continuity is as indicated in the table.

• If not as indicated in the table, replace the front outer handle.