If not as indicated in the table, replace the rear door latch and lock actuator.
NOTE:
When inspecting the latch side of the rear door latch switch, press in the latch lever using a flathead screwdriver and set it to the latched position.
1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.5].)
2. Remove the following parts:a. Rear door trim (See REAR DOOR TRIM REMOVAL/INSTALLATION.)b. Rear inner handle (See INNER HANDLE REMOVAL/INSTALLATION.)c. Rear door latch and lock actuator (See REAR DOOR LATCH AND LOCK ACTUATOR REMOVAL/INSTALLATION.)
3. Verify that the continuity is as indicated in the table.
If not as indicated in the table, replace the rear door latch and lock actuator.
NOTE:
When inspecting the latch side of the rear door latch switch, press in the latch lever using a flathead screwdriver and set it to the latched position.