SECURITY AND LOCKS PERSONALIZATION FEATURES SETTING PROCEDURE

< Previous Next >

2014 - Mazda6 - Body and Accessories

SECURITY AND LOCKS PERSONALIZATION FEATURES SETTING PROCEDURE

Advanced Keyless Entry System

Using M-MDS

1. Connect the M-MDS to DLC-2.

2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.

Select the "Module Programming".

Select "Programmable Parameters".

3. Select menu in the SSU.

4. Select an item name, and then select option.

M-MDS display

Function

Initial setting

Setting contents

Control unit

Advanced keyless function.^*1

The advanced keyless entry system and push button start system functions can be disabled.

Enabled.

Enabled. / Disabled.

Start stop unit

Walk Away Lock.

The out-of-area (reception area) type auto lock function can be set.

OFF

Not Adopted. / OFF / ON

Start stop unit

Auto Re-lock Time.

The operation start time of the auto re-lock function can be changed.

60 seconds

Not Adopted. / 30 seconds / 60 seconds / 90 seconds

Start stop unit

Lock Beep Volume.

The keyless beeper volume can be adjusted.

Medium

Not Adopted. / Off / Low / Medium / High

Start stop unit


M-MDS display	Function	Initial setting	Setting contents	Control unit
Advanced keyless function.^*1	The advanced keyless entry system and push button start system functions can be disabled.	Enabled.	Enabled. / Disabled.	Start stop unit
Walk Away Lock.	The out-of-area (reception area) type auto lock function can be set.	OFF	Not Adopted. / OFF / ON	Start stop unit
Auto Re-lock Time.	The operation start time of the auto re-lock function can be changed.	60 seconds	Not Adopted. / 30 seconds / 60 seconds / 90 seconds	Start stop unit
Lock Beep Volume.	The keyless beeper volume can be adjusted.	Medium	Not Adopted. / Off / Low / Medium / High	Start stop unit

*1: Because the push button start system function has been disabled, to start the engine press the upper part of the remote transmitter against the center of the push button start.

Using audio unit (with color LCD)

(See AUDIO UNIT PERSONALIZATION FEATURES SETTING PROCEDURE.)

Keyless Entry System

Using M-MDS

1. Connect the M-MDS to DLC-2.

2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.

Select the "Module Programming".

Select "Programmable Parameters".

3. Select menu in the SSU.

4. Select an item name, and then select option.

M-MDS display

Function

Initial setting

Setting contents

Control unit

Advanced keyless function.^*1

The keyless entry system and push button start system functions can be disabled.

Enabled.

Enabled. / Disabled.

Start stop unit

Auto Re-lock Time.

The operation start time of the auto re-lock function can be changed.

60 seconds

Not Adopted. / 30 seconds / 60 seconds / 90 seconds

Start stop unit

*1

Because the push button start system function has been disabled, to start the engine press the upper part of the remote transmitter against the center of the push button start.


M-MDS display	Function	Initial setting	Setting contents	Control unit
Advanced keyless function.^*1	The keyless entry system and push button start system functions can be disabled.	Enabled.	Enabled. / Disabled.	Start stop unit
Auto Re-lock Time.	The operation start time of the auto re-lock function can be changed.	60 seconds	Not Adopted. / 30 seconds / 60 seconds / 90 seconds	Start stop unit

Using audio unit (with color LCD)

(See AUDIO UNIT PERSONALIZATION FEATURES SETTING PROCEDURE.)

Power Door Lock System

Using M-MDS

1. Connect the M-MDS to DLC-2.

2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.

Select the "Module Programming".

Select "Programmable Parameters".

3. Select menu in the SSU.

4. Select an item name, and then select option.

M-MDS display

Function

Initial setting

Setting contents

Control unit

Unlock Mode (Without Touch Sensor)

2-step unlocking system can be set.

Once:Driver's, Twice: All Doors.

Not Adopted. / Touch Once: All Doors. / Once:Driver's, Twice: All Doors.

Start stop unit


M-MDS display	Function	Initial setting	Setting contents	Control unit
Unlock Mode (Without Touch Sensor)	2-step unlocking system can be set.	Once:Driver's, Twice: All Doors.	Not Adopted. / Touch Once: All Doors. / Once:Driver's, Twice: All Doors.	Start stop unit

For the auto door lock function, refer to the personalization features for the RBCM. (See CONTROL SYSTEM PERSONALIZATION FEATURES SETTING PROCEDURE.)

Using audio unit (with color LCD)

(See AUDIO UNIT PERSONALIZATION FEATURES SETTING PROCEDURE.)

< Previous Next >