Standard Clearance
a: 2.5—4.5 mm {0.10—0.17 in}
b: 4.0—8.0 mm {0.16—0.31 in}
c: 2.5—6.5 mm {0.10—0.25 in}
1. Measure the gap difference between the trunk lid and the body.
2. If not as specified, loosen the bolts or nuts, and reposition the trunk lid.
Standard Clearance
a: 2.5—4.5 mm {0.10—0.17 in}
b: 4.0—8.0 mm {0.16—0.31 in}
c: 2.5—6.5 mm {0.10—0.25 in}
3. Tighten the bolts or nuts. (See TRUNK LID REMOVAL/INSTALLATION)
1. Measure the height difference between the trunk lid and the body.
Standard Clearance
a: -1.8—0.2 mm {-0.070—0.007 in}
b: -3.0—1.0 mm {-0.11—0.03 in}
2. If the trunk lid does not open/close smoothly, adjust it by loosening the trunk lid lock striker installation screw. (See TBD.)
3. Tighten the bolts or nuts. (See TRUNK LID REMOVAL/INSTALLATION)
4. Spray or pour water on the door and surrounding area using a hose or high pressure water pressure car wash and verify that there is no water leakage.