STEP

INSPECTION

ACTION

1

• Switch the ignition ON (engine off or on).

• Operate the power window using the manual open/close function on the power window main switch.

• Does the power window operate properly?

Yes

Go to the next step.

No

• Inspect the power window main switch and the wiring harness.

• Repair or replace malfunctioning parts.

2

• Set the power cut switch to the UNLOCK (contact point: Close) position.

• Operate the power window using the power window subswitch.

• Does the power window operate properly?

Yes

Go to the next step.

No

• Inspect the power window subswitch and the wiring harness.

• Repair or replace malfunctioning parts.

3

• Set the power cut switch to the LOCK (contact point: Open) position.

• Operate all power windows other than the driver-side.

• Does the power window operate properly?

Yes

• Inspect the power cut switch and the wiring harness.

• Replace the power window main switch.

No

• Manual open/close function is normal.

• Perform the auto open/close function inspection.

STEP

INSPECTION

ACTION

1

• Switch the ignition ON (engine off or on).

• Operate the power window using the auto open /close function on the power window main switch.

• Does the power window operate properly?

Yes

Go to the next step.

No

If the power window automatically opens during the closing operation:

• Go to DOOR GLASS REVERSES EVEN THOUGH THE GLASS DOES NOT ENCOUNTER A FOREIGN OBJECT WHILE IT IS MOVING UP IN AUTOMATIC MODE [POWER WINDOW SYSTEMS (WITH AUTO-OPEN/CLOSE FUNCTION FOR DRIVER-SIDE)] [POWER WINDOW SYSTEMS (AUTO-OPEN/CLOSE FUNCTION)].

Others:

• Go to THE AUTO OPEN/CLOSE FUNCTION ON THE DRIVER-SIDE POWER WINDOW IS INOPERATIVE [POWER WINDOW SYSTEMS (WITH AUTO-OPEN/CLOSE FUNCTION FOR DRIVER-SIDE)] [POWER WINDOW SYSTEMS (AUTO-OPEN/CLOSE FUNCTION)].

2

• Operate the power window main switch to the close position while the power window is opening.

• Does the power window operation stop?

Yes

Go to the next step.

No

Replace the power window main switch (power window control unit is malfunctioning.)

3

• Operate the power window main switch to the open position while the power window is closing.

• Does the power window operation stop?

Yes

• Auto open/close function is normal.

• Perform the IG-OFF timer function inspection.

No

Replace the power window main switch (power window control unit is malfunctioning.)

STEP

INSPECTION

ACTION

1

• Close all doors.

• Switch the ignition from ON (engine off or on) to off (LOCK).

• Operate the power window main switch within 40 s after switching the ignition to off (LOCK).

• Does the power window operate?

Yes

Go to the next step.

No

• Inspect the door switches and related wiring harness.

• If above parts are okay, replace the power window main switch, then go to the next step.

• If above parts are incorrect repair or replace malfunction part (s), then go to the next step.

2

• Open any door.

• Switch the ignition from ON (engine off or on) to off (LOCK).

• Operate the power window main switch within 40 s after switching the ignition to off (LOCK).

• Does the power window operate?

Yes

• Inspect the door switches and related wiring harness.

• If above parts are okay, replace the power window main switch, then go to the next step.

• If above parts are incorrect repair or replace malfunction part (s), then go to the next step.

No

Go to the next step.

3

• Close all doors.

• Switch the ignition from ON (engine off or on) to off (LOCK).

• Operate the power window main switch within 60 s after switching the ignition to off (LOCK).

• Does the power window operate?

Yes

Replace the power window main switch (power window control unit is malfunctioning.)

No

• IG-OFF timer function operation is normal.

• Perform the auto reverse pinch protection function inspection.

STEP

INSPECTION

ACTION

1

• Switch the ignition ON (engine off or on).

• Fully open the driver-side power window.

• Set the hammer (thickness: 10 mm {0.39 in} or more) as shown below. Then, close the power window.

• Verify that the power window opens approx. 200 mm {2.87 in} after contacting the hammer and the operation stops.

• Does auto reverse pinch protection function operate properly?

Yes

Auto reverse pinch protection function is normal.

No

Go to the next step.

2

• Does power window open before contacting the hammer?

Yes

Go to DOOR GLASS REVERSES EVEN THOUGH THE GLASS DOES NOT ENCOUNTER A FOREIGN OBJECT WHILE IT IS MOVING UP IN AUTOMATIC MODE [POWER WINDOW SYSTEMS (WITH AUTO-OPEN/CLOSE FUNCTION FOR DRIVER-SIDE)] [POWER WINDOW SYSTEMS (AUTO-OPEN/CLOSE FUNCTION)].

No

Initialize the power window main switch.

NOTE:

• Before initializing the power window main switch, cut off the power supply to the power window main switch for approx. 60 s. Then, reconnect it again after approx. 60 s:

• Disconnect the negative battery cable.

• Disconnect the power window main switch connector.

• Remove the fuse for the power window system.