< Previous   Next >

2014 - Mazda6 - Body and Accessories

DTC U2100:00 [REAR BODY CONTROL MODULE (RBCM)]



Description

Rear body control module (RBCM) configuration error

Detection condition

  • Rear body control module (RBCM) configuration error (no configuration) detected.

Fail-safe function

Not applicable

Possible cause

  • Rear body control module (RBCM) configuration error

  • Rear body control module (RBCM) malfunction

System wiring diagram

Not applicable


Diagnostic Procedure

Step

Inspection

Action

1

VERIFY REAR BODY CONTROL MODULE (RBCM) DTCs AGAIN

Yes

Go to the next step.

No

Go to Step 4.

2

PERFORM REAR BODY CONTROL MODULE (RBCM) CONFIGURATION (USING AS-BUILT DATA)

Yes

Using the M-MDS, perform the rear body control module (RBCM) configuration (using As-Built data) again, then go to the next step.

(See REAR BODY CONTROL MODULE (RBCM) CONFIGURATION (USING AS-BUILT DATA).)

No

Go to Step 4.

3

VERIFY THAT REPAIRS HAVE BEEN COMPLETED

Yes

Repeat the inspection from Step 1.

Go to the next step.

No

Go to the next step.

4

VERIFY IF OTHER DTCs DISPLAYED
  • Are any other DTCs displayed?

Yes

Repair or replace the malfunctioning part according to the applicable DTC troubleshooting.

(See DTC TABLE [REAR BODY CONTROL MODULE (RBCM)].)

No

DTC troubleshooting completed.




< Previous   Next >
Back to Top
© 2012 Mazda North American Operations, U.S.A.