Description

• U0100:00

• Communication error with PCM

• U0101:00

• Communication error with TCM

• U0151:00

• Communication error with SAS control module

• U0155:00

• Communication error with instrument cluster

• U0214:00

• Communication error with start stop unit

Detection condition

• U0100:00

• Position memory control module could not receive the CAN signal from the PCM for 5 s or more.

• U0101:00

• Position memory control module could not receive the CAN signal from the TCM for 5 s or more.

• U0151:00

• Position memory control module could not receive the CAN signal from the SAS control module for 5 s or more.

• U0155:00

• Position memory control module could not receive the CAN signal from the instrument cluster for 5 s or more.

• U0214:00

• Position memory control module could not receive the CAN signal from the start stop unit for 5 s or more.

Fail-safe function

• U0100:00

• Memory seat positioning using position memory switch and remote transmitter:

• If the ignition is switched ON (engine off or on), inhibits all memory seat positioning.

• U0101:00

• Memory seat positioning using position memory switch and remote transmitter:

• If the ignition is switched ON (engine off or on), inhibits all memory seat positioning.

• U0151:00

• Memory seat positioning using position memory switch and remote transmitter:

• If the ignition is switched ON (engine off or on), inhibits all memory seat positioning.

• U0155:00

• Memory seat positioning using position memory switch and remote transmitter:

• Inhibits all memory seat positioning.

• U0214:00

• Memory seat positioning using remote transmitter:

• Inhibits all memory seat positioning.

• Memory registration using remote transmitter:

• Inhibits the memory registration.

Possible cause

• Malfunction in CAN line between PCM and position memory control module

• Malfunction in CAN line between TCM and position memory control module

• Malfunction in CAN line between SAS control module and position memory control module

• Malfunction in CAN line between instrument cluster and position memory control module

• Malfunction in CAN line between start stop unit and position memory control module

System wiring diagram

Not applicable