PID name (definition)

Unit/Operation

Operation Status (Reference)

AB_WL

(Air bag system warning light status)

Lamp_Off/Lamp_On/Plant_Mode/Unknown

• Air bag system warning light off: Lamp_Off

• Air bag system warning light on: Lamp_On

• Air bag system warning light status: Plant_Mode

• Air bag system warning light status: Unknown

B_SW_P_FLT

(Passenger-side buckle switch malfunction status)

O.K./FAULT

• Passenger-side buckle switch normal: O.K.

• Passenger-side buckle switch abnormal: Fault

OCS_DTC_CLR

(Seat weight sensor DTC cleared status)

Starting/

Normal End/

In Process/

OCS Fault

Fault information cleared at seat weight sensor

P_OCS_ST

(Seat weight sensor status)

Empty/

SMALL/

Indeterminate/

LARGE

Occupant classification status determined by seat weight sensor

P_WEIGHT

(Seat weight sensor measured weight of passenger)

Kg

Display of load (body weight) on passenger-side seat

RES_C_AB_D

(Driver-side curtain air bag module resistance nominal)

ohm

Continuous: 0.81–6.42 ohms

RES_C_AB_P

(Passenger-side curtain air bag module resistance nominal)

ohm

Continuous: 0.81–6.42 ohms

RES_F_AB1_D

(Driver-side air bag module (inflatorNo.1) resistance nominal)

ohm

Continuous: 0.99–6.42 ohms

RES_F_AB1_P

(Passenger-side air bag module (inflatorNo.1) resistance nominal)

ohm

Continuous: 0.81–6.42 ohms

RES_F_AB2_D

(Driver-side air bag module (inflatorNo.2) resistance nominal)

ohm

Continuous: 0.99–6.42 ohms

RES_F_AB2_P

(Passenger-side air bag module (inflator No.2) resistance nominal)

ohm

Continuous: 0.81–6.42 ohms

RES_PCD_BAR

(Poorly connected detector bar terminals resistance nominal (all of SAS control module connectors))

ohm

• Normal connected: 100 ohm or less

• Poor connected: 20 kilohm or more

RES_S_AB_D

(Driver-side side air bag module resistance nominal)

ohm

Continuous: 0.81–9.85 ohms

RES_S_AB_P

(Passenger-side side air bag module resistance nominal)

ohm

Continuous: 0.81–9.85 ohms

RES_SB_LP_D

(Driver-side lap pre-tensioner seat belt resistance nominal)

ohm

Continuous: 0.81–6.42 ohms

RES_SB_LP_P

(Passenger-side lap pre-tensioner seat belt resistance nominal)

ohm

Continuous: 0.81–6.42 ohms

RES_SB_P_D

(Driver-side pre-tensioner seat belt resistance nominal)

ohm

Continuous: 0.81–6.42 ohms

RES_SB_P_P

(Passenger-side pre-tensioner seat belt resistance nominal)

ohm

Continuous: 0.81–6.42 ohms

SEAT_B_D

(Driver-side buckle switch status)

Unbuckled/Buckled

• Driver-side front seat belt fastened (Driver-side buckle switch off): Buckled

• Driver-side front seat belt not fastened (Driver-side buckle switch on): Unbuckled

SEAT_B_P

(Passenger-side buckle switch status)

Unbuckled/Buckled

Occupant seated in passenger-side front seat: On

• Passenger-side front seat belt fastened (Passenger-side buckle switch off): Buckled

• Passenger-side front seat belt not fastened (Passenger-side buckle switch on): Unbuckled

VPWR_IGA

(SAS control module power voltage)

V

Ignition switch is at ON: IG1 voltage