1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.5].)
2. Remove the following parts:a. Glove compartment (See GLOVE COMPARTMENT REMOVAL/INSTALLATION.)b. Dashboard under cover (See DASHBOARD UNDER COVER REMOVAL/INSTALLATION.)c. Side wall (passenger-side) (See SIDE WALL REMOVAL/INSTALLATION.)d. Front heat duct (passenger-side) (See FRONT HEAT DUCT REMOVAL/INSTALLATION.)
3. Disconnect the air mix actuator connector.
4. Remove the screw.
5. Remove the air mix actuator.
6. Install in the reverse order of removal.