If not within the specification, replace the tie-rod end.
Tie-rod end rotational torque
0.6—3.0 N·m {6.2—30 kgf·cm, 5.4—26 in·lbf}
1. Inspect the tie-rod end for damage and the boot for cracks.
If there is any malfunction, replace the tie-rod end.
2. Inspect for excessive play.
If there is any malfunction, replace the tie-rod end.
3. Rotate the tie-rod end five times.
4. Install two nuts to the ball joint and measure the tie-rod end rotational torque using a torque wrench.
If not within the specification, replace the tie-rod end.
Tie-rod end rotational torque
0.6—3.0 N·m {6.2—30 kgf·cm, 5.4—26 in·lbf}