1

Electric power steering (EPS) warning light does not illuminate with ignition switched ON.*

• EPS warning light circuit malfunction in the instrument cluster.

• An error originates from the EPS CM, and the off signal is generated.

• EPS CM malfunction

STEP

INSPECTION

ACTION

1

• Turn on the EPS warning light at instrument cluster using the “WL+IL” of the M-MDS active command modes function.

• Is the EPS warning light illuminated?

Yes

EPS CM malfunction. Replace the EPS CM.

(See STEERING GEAR AND LINKAGE REMOVAL/INSTALLATION.)

No

Perform the instrument cluster configuration, then repeat the inspection from Step 1.

(See INSTRUMENT CLUSTER CONFIGURATION (USING AS-BUILT DATA).)

If the malfunction recurs, replace the instrument cluster.

(See INSTRUMENT CLUSTER REMOVAL/INSTALLATION.)