< Previous   Next >

2014 - Mazda6 - Transmission/Transaxle

ENGINE FLARES UP OR SLIPS WHEN UPSHIFTING OR DOWNSHIFTING [FW6A-EL]



TROUBLESHOOTING ITEM

Engine flares up or slips when upshifting or downshifting

DESCRIPTION

  • When accelerator pedal is depressed, engine speed increases normally but vehicle speed increases slowly.

  • When accelerator pedal is depressed while driving, engine speed increases but vehicle speed does not.

POSSIBLE CAUSE

  • Insufficient TCM learning

  • Signal malfunction

    • APP sensor malfunction

    • CKP sensor malfunction

    • MAF sensor malfunction


CAUTION:

Related PCM PIDs

Item (definition)

Unit/Condition

Definition

Condition/Specification (Reference)

APP

%

Accelerator pedal position

  • Accelerator pedal released: Approx. 0%

  • Accelerator pedal depressed: Approx. 100%

MAF

g/Sec

Mass air flow

  • Displays MAF

V

  • Switch ignition ON (engine off) (MAF: 0.59 g/s {0.078 lb/min}): Approx. 0.72 V

  • Idle (after warm up) (MAF: 2.17 g/s {0.287 lb/min}): Approx. 0.86 V

  • Racing (engine speed is 2,000 rpm) (MAF: 4.73 g/s {0.626 lb/min}): Approx. 1.07 V

RPM

RPM

Engine speed

  • Displays engine speed


Diagnostic procedure

STEP

INSPECTION

ACTION

1

VERIFY MALFUNCTION SYMPTOM
  • Is the malfunction symptom at the same level compared to a vehicle of the same model?

Yes

Symptom troubleshooting is completed.

No

Go to the next step.

2

PERFORM INITIAL LEARNING
  • Does the symptom disappear?

Yes

Symptom troubleshooting is completed.

No

Go to the next step.

3

INSPECT SIGNAL PARTS FOR MALFUNCTION

Yes

Repair or replace any malfunctioning parts according to the inspection result.

No

Symptom troubleshooting is completed.




< Previous   Next >
Back to Top
© 2012 Mazda North American Operations, U.S.A.