Item

Specification

Brake fluid type

SAE J1703 or FMVSS116 DOT-3

Brake pedal height (reference value)

136 mm {5.35 in}

Brake pedal play

3—5 mm {0.12—0.19 in}

Brake pedal-to-floor clearance (Brake pedal when depressed at 147 N {15.0 kgf, 33.0 lbf})

91 mm {3.6 in} or more

Front disc plate runout limit

0.04 mm {0.002 in}

Minimum front disc plate thickness

26.0 mm {1.02 in}

Minimum front disc plate thickness after machining using a brake lathe on-vehicle

26.8 mm {1.06 in}

Minimum front disc pad thickness

2.0 mm {0.079 in} min.

Rear disc plate runout limit

0.1 mm {0.004 in}

Minimum rear disc plate thickness

8.0 mm {0.31 in}

Minimum rear disc plate thickness after machining using a brake lathe on-vehicle

8.8 mm {0.35 in}

Minimum rear disc pad thickness

2.0 mm {0.079 in} min.

Parking brake lever stroke when pulled at 98 N {10 kgf, 22 lbf}

2—3 notches

Vacuum amount at 0 kPa {0 mmHg, 0 inHg}

Brake pedal force

Fluid pressure

200 N {20.4 kgf, 45.0 lbt}

460 kPa {4.69 kgf/cm², 66.7 psi} or more

Vacuum amount at 66.7 kPa {500 mmHg, 19.7 inHg}

Brake pedal force

Fluid pressure

200 N {20.4 kgf, 45.0 lbt}

7,150 kPa {72.91 kgf/cm², 1,037 psi} or more

Measurement condition

Specification

Engine speed

Change in vacuum amount

Period of time change in vacuum amount condition met

While idling (520—700 rpm (reference value))

From 60 kPa {450 mmHg, 18 inHg} to 67 kPa {503 mmHg, 20 inHg}

8 s or less

Measurement condition

Specification

While idling (no time designation)

93.3 kPa {700 mmHg, 27.6 inHg} or more