1. Remove in the order indicated in the table.
2. Install in the reverse order of removal.
3. After installation, depress the brake pedal a few times, rotate the wheel by hand, and verify that the brake does not drag.
| 1 | Bolt |
| 2 | Caliper |
| 3 | Disc pad (See Disc Pad Installation Note.) |
| 4 | Wear indicator |
| 5 | Shim |
| 6 | Guide plate |
1. Clean the exposed area of the piston.
2. Push the piston in using the commercially available disc brake expand tool.
3. Install the disc pads to the mounting support.