2014 - Mazda6 - Engine

EVAPORATIVE CHAMBER INSPECTION [SKYACTIV-G 2.5]

1. Remove the evaporative chamber. (See EVAPORATIVE CHAMBER REMOVAL/INSTALLATION [SKYACTIV-G 2.5].)

2. Blow air flow port A and verify that there is air flow.

• If there is no air flow, replace the evaporative chamber. (See EVAPORATIVE CHAMBER REMOVAL/INSTALLATION [SKYACTIV-G 2.5].)

3. Verify that there is no deformation or cracking of the evaporative chamber.

• If the exterior is no normal, replace the evaporative chamber. (See EVAPORATIVE CHAMBER REMOVAL/INSTALLATION [SKYACTIV-G 2.5].)