2014 - Mazda6 - Engine

FUEL INJECTOR INSPECTION [SKYACTIV-G 2.5]

Resistance Inspection

1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.5].)

2. Remove the plug hole plate. (See PLUG HOLE PLATE REMOVAL/INSTALLATION [SKYACTIV-G 2.5].)

3. Disconnect the fuel injector connector.

4. Inspect the resistance between fuel injector terminals A and B.

Fuel injector resistance

• 1.74—2.04 ohms [20 °C {68 °F}]

• If not within the specification, replace the fuel injector. (See FUEL INJECTOR REMOVAL/INSTALLATION [SKYACTIV-G 2.5].)